Signal Isolators & Transducers

Non-Intrinsic universal signal converter

Different industrial sensors and process control systems output various signals which may not be compatible with the existing measurement equipment. Because of that it is necessary to convert an input signal into an industrial standard range. Signal converters takes up the signals from field device and convert them into a standard signal ( e.g. 4-20 mA, 0-10 V etc.). Phoenix Contact offers you a wide range of different universal signal converters with high functionality:

dip switch, jumper or pc configuration
ground loop isolation
noise filtering
minimum wiring efforts
space saving dimensions

MACX Analog / MCR Analog

Universal analog converters with accurate conversion.

dip switch or pc configuration
universal system for different applications therefore reducing the amount of part numbers and decreasing the storage costs
general galvanic isolation
high functionality and flexibility
Zone 2, Class I Division 2 approval
Ex-i and Non-Ex-i isolators available

Further product information on MACX Analog / MCR Analog

MINI Analog

Modular and very small range of analog converters with an innovative power supply concept.

slim dimensions, only 6.2 mm wide
general galvanic isolation
low power consumption
configuration via DIP-switches
system cabling possible
complete product range including Zone 2 and Class I Division 2 approval
only Non-Ex i isolators available

Further product information on MINI Analog

Intrinsic safe signal isolators & transducers

The protection type "intrinsic safety" (Ex-i) has become established worldwide for MCR technology because of its comparatively simple installation and economical equipment.

Regardless of the measurement and control application, whether system technology or individual applications the intrinsic safe isolators and transducers from Phoenix Contact offers tailor-made, economical solutions to realize your automation task, and contributes to a high availability of the system.

MACX Analog Ex

With a housing design width of only 12.5 mm, the MACX Analog Ex product range provides one of the narrowest Ex-i signal isolator series. Therefore it is possible to save up to 45% space in the control cabinet. The MACX Analog Ex series offer a complete product range for your requirements and control tasks in process industry projects.

1 or 2-channel isolators with 3-way isolation
HART functionality
NAMUR isolating amplifiers
FDT/DTM programmable temperature transducers
installation in Ex Zone 2 and for Ex-i circuits up to Ex Zone 0 (gas) and 20 (dust)
SIL approvals as per IEC 61508 enable their use in safety applications